Project Description

inductar® EL cube

5 elements in 1 analyzer.

The world’s first 5 element analyzer for the analysis of CS/ONH in inorganic materials

The inductar® EL is the first elemental analyzer which can analyze carbon, sulfur, oxygen, nitrogen and hydrogen in inorganic materials. The furnace can be heated up to 3000 °C and thanks to the optional camera the gas release can be observed in real time. Carbon, sulfur and oxygen are detected with a wide range IR detector, hydrogen is detected by an innovative electrochemical detection system and nitrogen is detected by a TCD.

Through his maximum user convenience and robustness in 24/7 operation the inductator is highly efficient in the R&D lab or in quality control. 

The  inductar® EL offers users the following features:

  • Versatility
  • Highest precision
  • Robustness
  • Easy maintenance
  • 24/7 operation
  • Combustion in Oxygen at 2000°C (CS) and Helium or Argon at 3000°C (ONH)
  • Easy sample preparation and handling
  • 5 elements in 1 device
  • Linear single and multipont calibration
  • Optional 21 CFR Part 11 compliant software is available
  • Sample weight up to 1 g
  • Ceramic or graphite sample containers
  • Fully automatic operation possible
  • Analysis time < 3 min
  • Standard deviation C: 1 ppm absolute or 0.5 % RSD whichever is greater
  • S: 1 ppm absolute or 1 % RSD whichever is greater
  • O: 0.016 ppm absolute or 1 % RSD whichever is greater
  • N: 0.15 ppm absolute or 1 % RSD whichever is greater
  • H: 0.025 ppm absolute or 1 % RSD whichever is greater
  • Operation modes 
    • C
    • S
    • H
    • CS
    • ON
    • OH
    • ONH
  • 89 position autosampler
  • 42 position autosampler
  • Optical camera
  • Electronic analytical balance
  • Nickel capsule press
  • Lab furnace
  • Halogen trap

If you are interested in getting further information about additional equipment or consumables please do not hesitate to contact us.

Not available.

If you are interested in further information you can contact our service department using the contact form.

request a quote